Vibration Product Solution Application

How to enable ISO2631 on Palert Plus?

Created on 2023年7月11日下午5:01 by Selina Luo/SANLIEN|Topic Responses: 22

Step 1. FTP connect to the station.
Step 2. Navigate to /home/pi/Desktop/vAlert/bin/vAlert8.cfg
Step 3. Copy and paste the code below at the end of vAlert8.cfg

###########################################

# ISO2631
###########################################
[ISO_2631]
LOCATION_TYPE 2
MAXIMUM_LATCH YES

Step 4. Save and close
Step 5. Press 4 seconds on the device start button to reload
Step 6. Youa all set! Now shake the device!

Q&A

Created on 2023年7月11日下午3:50 by Selina Luo

Read more...

How to locate a file in wms when coding?

Created on 2023年7月11日下午3:50 by Selina Luo/SANLIEN
Step 1. Check the link on address bar and look for "item=". In the example below "item=project_list" http://wms.sanlien.com.tw/sanlien_crm/user.php?item=project_list Step 2. Connect to wms via FTP and navigate to /var/www/html/sanlien_crm/user.php Step 3. Look for the case "project_list" and ...
Read more...

Why is the wms displaying very slow when I click on "ISO"?

Created on 2023年7月11日下午3:54 by Selina Luo/SANLIEN
The ISO files are too heavy.
Read more...

How to add a location, devices on location, and users ?

Created on 2023年7月11日下午3:56 by Selina Luo/SANLIEN
Step 1. Go to wms.sanlien.com.tw/sanlien Step 2. Login with your credentials Step 3 . Click on the device or project type (Palert Plus, VMS, Geo Tech) Step 4. Click the plus icon on the upper right corner to add new devices on the project Step 5. Edit the name and change the serial numbers Step ...
Read more...

How to find a device ISO2631 report on wms ?

Created on 2023年7月11日下午4:49 by Selina Luo/SANLIEN
Step 1. Go to wms.sanlien.com.tw/sanlien_crm/ Step 2. Log in your account Step 3. Click on Palert Plus or the corresponding project name as shown in the picture below : Step 4. Select the site location on the right menu bar, eg : Napier Port Image Step 5. Select the device you are looking for the ...
Read more...

How to configure PX-01 to generate RSHD report and upload on WMS?

Created on 2023年7月11日下午4:53 by Selina Luo/SANLIEN

Read more...

How to set up a Palert station to upload DIN files to WMS?

Created on 2023年7月11日下午4:54 by Selina Luo/SANLIEN
Step 1. FTP connect to the station Step 2. Navigate to /home/pi/Desktop/vAlert/bin/vAlert8.cfg Step 3. Change serial_number with the serial number of the device and copy and paste the code below at the end of vAlert8.cfg # API [API_CONFIG] EARTHQUAKE_FALLING_API YES DIN_FILE_UPLOAD YES ...
Read more...

How to add a Palert ISO file to WMS?

Created on 2023年7月11日下午4:56 by Selina Luo/SANLIEN
Step 1. FTP connect to the station. Step 2. Navigate to /home/pi/Desktop/vAlert/bin/vAlert8.cfg Step 3. Change serial_number with the serial number of the device and copy and paste the code below at the end of vAlert8.cfg # API [API_CONFIG] EARTHQUAKE_FALLING_API YES ISO2631_FILE_UPLOAD YES ...
Read more...

How to enable DORTS on Palert Plus?

Created on 2023年7月11日下午5:00 by Selina Luo/SANLIEN
Step 1. FTP connect to the station Step 2. Navigate to /home/pi/Desktop/vAlert/bin/vAlert8.cfg Step 3. Copy and paste the code below at the end of vAlert8.cfg # DORTS [DORTS_VIBRATION] BUILDING_TYPE 6 WARNING_DB -6 MAXIMUM_LATCH YES Step 4. Save and close Step 5. Press 4 seconds on the device ...
Read more...

How to enable ISO2631 on Palert Plus?

Created on 2023年7月11日下午5:01 by Selina Luo/SANLIEN

How to enable DIN on Palert S3?

Created on 2023年7月11日下午5:02 by Selina Luo/SANLIEN
Step 1. FTP connect to the station Step 2. Navigate to /home/pi/Desktop/vAlert/bin/vAlert8.cfg Step 3. Copy and paste the code below at the end of vAlert8.cfg # DIN [DIN_VIBRATION] FFT_SECONDS 10 DISPLAY_ON_LCD YES STRUCTURE_TYPE 2 GEO_PHONE NO RECORD YES RECORD_ALWAYS YES WARNING_DB -6 PGA_RELAY ...
Read more...

What is ISO2631?

Created on 2023年7月11日下午5:04 by Selina Luo/SANLIEN
ISO2631 is the international vibration standard which uses the vibration acceleration to set the standard. See the vibration table below:
Read more...

What is DIN4150-3?

Created on 2023年7月11日下午5:07 by Selina Luo/SANLIEN
DIN4150-3 is the German standard for vibration. DIN4150-3 is to regulate the vibration impact on structures, on X-axis we have the frequency and the Y-axis the Peak Per Velocity (PPV). Type 1 , Type2 , Type 3 are the types of structures with Type 1 being the least sensible to vibration and Type 3 ...
Read more...

What is DORTS?

Created on 2023年7月11日下午5:17 by Selina Luo/SANLIEN
DORTS stands for Department Of Rapid Transit but is used on Palert plus to refer to the vibration standard used by the Department Of Rapid Transit in Taipei. The vibration velocity used in this standard comes from an integration of the acceleration generated by accelerometers in the device. See ...
Read more...

What is the difference between Palert Plus /Palert S3/PX-01 Web interface?

Created on 2023年7月11日下午5:18 by Selina Luo/SANLIEN
1. Palert Plus Web interface has "DIN Daily" and "DIN EVENT" reports enabled in the left menu bar 2. Palert S3 web interface has "DORTS" and "ISO Daily" reports enabled in the left menu bar 3. PX-01 has none of the report above enabled on its menu bar
Read more...

How to switch web version from Palert plus to Palert S3 or PX-01?

Created on 2023年7月11日下午5:20 by Selina Luo/SANLIEN
Step 1. FTP connect to station Step 2. Navigate to /var/www/html/php/version.txt Step 3. Change "Palert Plus" to "Palert Plus S3" or "Px-01" Step 4. Save and refresh your web page
Read more...

Recorded file chart displacement is 0

Created on 2023年7月11日下午5:21 by Selina Luo/SANLIEN
Step 1. FTP connect to station Step 2. Navigate to /home/pi/Desktop/vAlert/bin/vAlert8.cfg Step 3. Edit vAlert8.cfg , change "PD_TRIG_ENABLE NO" to "PD_TRIG_ENABLE YES" Step 4. Save and press 4 seconds on Palert plus/Palert S3 start button to reload
Read more...

Can't upload file to Palert Using Palert

Created on 2023年7月11日下午5:22 by Selina Luo/SANLIEN
Step 1. Use Putty to SSH connect to the station Step 2. Type the command '$ df -h' and check the available storage Step 3. If the available storage is 0 (which is most likely the case here), delete some files. If not, please contact TOM or TING for assistance.
Read more...

Palert web streaming not displaying

Created on 2023年7月11日下午5:24 by Selina Luo/SANLIEN
Step 1. Open Putty Step 2. SSH connect to station Step 3. Type the command $ killall node If command returns no process named node, type the command "$ node" and enter If the command above returns "node:command not found", type the command "$ sudo apt-get install node" Step 4. Refresh web ...
Read more...

Why is Palert plus web interface blank?

Created on 2023年7月11日下午5:26 by Selina Luo/SANLIEN
Step 1. Open Putty Step 2. SSH connect to station Step 3. Navigate to /etc/php5/apache2/php.ini. Step 4. Edit the file php.ini at the short_ open_tag=Off and Change "Off " to "ON". Step 5. Save . Step 6. Reload web page
Read more...

COAP interface installation and usage

Created on 2023年7月12日上午8:34 by Selina Luo/SANLIEN
Please download full guideline here
Read more...

FTP scripts

Created on 2023年7月12日上午8:35 by Selina Luo/SANLIEN
Purpose of project Send ftp files and to a remote ftp server and resend them in case of connection faillure. Note ftp.sh is only sending the files modified in less than one hour . Manual Usage Install FTP server on the Raspberry pi by running the command $ sudo apt-get update then $ sudo apt-get ...
Read more...

Palert/PX-01 web interface upgrade guideline

Created on 2023年7月12日上午8:38 by Selina Luo/SANLIEN
In this short guideline i'm assuming that you know how to: - Use a FTP client (WinSCP) - Set up a Palert station (Power and Ethernet) - Git command line Steps to upgrade to web interface: 1. Download the latest version - Git : $ git clone http://gitlab.sanlien.com.tw/jean/palert-s3-web.git - Or ...
Read more...